Aqua Shower Premium – Simple DIY Installation

With a simple Do-it-Yourself Process, you can install the ASP in less than 5 minutes.

Step 1: Unscrew

Unscrew and remove the shower-head from the shower arm and wipe off any visible debris. To prevent leakage wrap the threads on the shower arm using Teflon tape.

Step 2: Attach

Align and attach the female (inner) threads of your ASP with the male (outer) threads of the shower arm and rotate clockwise to tighten it. 

Step 3: Screw

Replace the shower-head and check for leaks. Use a spanner to tighten if needed.

Step 4: You’re all set!

Flats and Independent Homes – Easy Plumbing Installation

Installing an Aqua Conditioner for your entire Home is simple and easy for any plumber in and around your area using our  Installation guides for Bathrooms or Kitchens and Independent Homes or Villas.

Step 1: Gather parts and Equipment

Make sure you have the required parts and equipment needed to carry out the process. To make this easy we have a checklist down below.

Step 2: Assemble the Manifold

Assemble them piece by piece by following the steps to create the final manifold. Use teflon tape on both ends of the Aqua Conditioner and the right amount of PVC solvent, to prevent leakage.

Just the right amount of PVC solvent

Teflon (PTFE) tape is a must for threads

In-line manifold (Bathrooms & Flats)

Be sure not to overtighten things

Feel free to Call us in case of any issues

Bypass manifold (Homes & Villas)

Step 3: Attach and you’re all set!

Attach the manifold onto your pipeline and enjoy the Conditioned water experience for your bathroom, kitchen or your entire home!

Flats: Bathrooms and Kitchens

Independent Homes & Villas

Installation Support

  1. Installation Guide for
  2. Bathrooms & Kitchens.

  1. Installation Guide for
  2. Independent Homes & Villas.

Ask us about our Partners in
Mumbai, Pune, Delhi, Bangalore, Chennai and Hyderabad